Panasonic Eluga Turbo firmware stock ROM and flash file free download with flashing and installation guide.
Panasonic Eluga Turbo Quick Review
The smartphone was launched on January, 2016.
You May Like:
Panasonic Eluga U Firmware Flash File Download
The Panasonic Eluga Turbo runs on Android 5.1 (Lollipop), FitHome UI operating system and packs 32GB 3GB RAM of inbuilt storage, and is powered by a Octa-core 1.5 GHz Cortex-A53 processor.
This device is powered by a 2350mAh of Li-Ion battery.
The phone comes with a 5.0″ desplay size, IPS LCD capacitive touchscreen with a resolution of 720×1280 pixels. It has a display aspect ratio of 16:09 and ~68.0% of screen ratio with 16M of display colors.
You May Like:
For the camera, the smartphone comes with Single lens of 13 MP back camera and Single lens of 5 MP front camera for selfies
This mobile phone is a Hybrid Dual SIM (Nano-SIM/ Micro-SIM, dual stand-by), which measures 142.4 x 71.2 x 6.9 mm (5.61 x 2.80 x 0.27 in) (height x width x thickness) and weighs 145g (5.11 oz). It was launched in Marine Blue, Champagne Gold, Rose Gold colors.
Panasonic Eluga Turbo Stock ROM / Firmware
Panasonic stock ROM is an advanced way of factory reset, of course you can’t be able to use hard reset or normal factory reset procedure to unbrick your android device, you’ll always get stuck at bootloop, but once you’ve flashed or installed the recommended stock ROM on your Panasonic Eluga Turbo, you’ll always recover your phone to normal.
Flashing and installing Panasonic Eluga Turbo Official Stock ROM can help you solve many problem with your Panasonic smartphones. If your phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem.
Download Eluga Turbo Flash File
Before you begin flashing your phone, it is important to have all the flash files / tools at hand:
- Install Panasonic USB drivers on your computer, Download And Install Panasonic USB Drivers
- Download SP Flash Tool for Windows: Download And Install Sp Flash Tool
- Download & extract WiseLink Tool for Windows: Download WiseLink tool to flash all Mediatek Devices
Download Panasonic Eluga Turbo Firmware
Click the download link below to download the StockROM / Firmware
How to Flash or Install Panasonic Eluga Turbo Firmware (ROM)
- Download and extract the Panasonic Eluga Turbo stock firmware package on the computer.
- After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
- Install the provided USB Driver on the Computer, and if in case USB Driver is already installed, then SKIP this step.
- Follow the How-to Flash Manual to Flash or install the Firmware on your Eluga Turbo Device.
|3G Network||HSDPA 850 / 900 / 1900 / 2100|
|Speed||HSPA, LTE Cat4 150/50 Mbps|
|Status||Available. Released 2016, January|
|Real Camera Type||Single Lens|
|Rear Features||Quad-LED flash, HDR|
|Selfie Sensor(s)||Single Lens|
|Memory (Ram)||32GB 3GB RAM|
|SIM||Hybrid Dual SIM (Nano-SIM/ Micro-SIM, dual stand-by)|
|Weight||145g (5.11 oz)|
|WLAN||Wi-Fi 802.11 a/b/g/n, Wi-Fi Direct, hotspot|
|Radio||FM radio, RDS|
|Resolution||720 x 1280 pixels, 16:9 ratio (~294 ppi density)|
|Type||IPS LCD capacitive touchscreen, 16M colors|
|Size||5.0 inches, 68.9 cm2 (~68.0% screen-to-body ratio)|
|Colors||Marine Blue, Champagne Gold, Rose Gold|
|CPU||Octa-core 1.5 GHz Cortex-A53|
|Operating System||Android 5.1 (Lollipop), FitHome UI|
|Chipset||Mediatek MT6753 (28 nm)|