TECNO Spark Pro firmware stock ROM and flash file free download with flashing and installation guide.
TECNO Spark Pro Quick Review
The smartphone was launched on October, 2017.
You May Like:
Tecno T20 Firmware Flash File Download
The TECNO Spark Pro runs on Android 7.0 (Nougat) operating system and packs 16GB 1GB RAM, 16GB 2GB RAM of inbuilt storage, and is powered by a Quad-core 1.3 GHz processor.
This device is powered by a 3000mAh of Li-Ion battery.
The phone comes with a 5.5″ desplay size, IPS LCD capacitive touchscreen with a resolution of 720×1280 pixels. It has a display aspect ratio of 16:09 and ~71.3% of screen ratio with 16M of display colors.
You May Like:
For the camera, the smartphone comes with Single lens of 13 MP back camera and Single lens of 8 MP front camera for selfies
This mobile phone is a Dual SIM, which measures 153 x 76.4 x 7.9 mm (6.02 x 3.01 x 0.31 in) (height x width x thickness) and weighs 182g (6.42 oz). It was launched in Coral Blue, Champagne Gold, Black, Metallic Red colors.
TECNO Spark Pro Stock ROM / Firmware
TECNO stock ROM is an advanced way of factory reset, of course you can’t be able to use hard reset or normal factory reset procedure to unbrick your android device, you’ll always get stuck at bootloop, but once you’ve flashed or installed the recommended stock ROM on your TECNO Spark Pro, you’ll always recover your phone to normal.
Flashing and installing TECNO Spark Pro Official Stock ROM can help you solve many problem with your TECNO smartphones. If your phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem.
Download Spark Pro Flash File
Before you begin flashing your phone, it is important to have all the flash files / tools at hand:
- Install TECNO USB drivers on your computer, Download And Install TECNO USB Drivers
- Download SP Flash Tool for Windows: Download And Install Sp Flash Tool
- Download & extract WiseLink Tool for Windows: Download WiseLink tool to flash all Mediatek Devices
Download Tecno Spark Pro K8 Firmware
Click the download link below to download the StockROM / Firmware
How to Flash or Install TECNO Spark Pro Firmware (ROM)
- Download and extract the TECNO Spark Pro stock firmware package on the computer.
- After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
- Install the provided USB Driver on the Computer, and if in case USB Driver is already installed, then SKIP this step.
- Follow the How-to Flash Manual to Flash or install the Firmware on your Spark Pro Device.
|3G Network||HSDPA 900 / 2100|
|4G Network||3, 7, 20|
|Speed||HSPA 42.2/5.76 Mbps, LTE|
|Technology||GSM / HSPA / LTE|
|Status||Available. Released 2017, November|
|Real Camera Type||Single Lens|
|Rear Features||Quad-LED flash, HDR|
|Selfie Sensor(s)||Single Lens|
|Memory (Ram)||16GB 1GB RAM, 16GB 2GB RAM|
|Weight||182g (6.42 oz)|
|WLAN||Wi-Fi 802.11 b/g/n, hotspot|
|USB||microUSB 2.0, USB On-The-Go|
|Bluetooth||4.2, A2DP, LE|
|Resolution||720 x 1280 pixels, 16:9 ratio (~267 ppi density)|
|Type||IPS LCD capacitive touchscreen, 16M colors|
|Size||5.5 inches, 83.4 cm2 (~71.3% screen-to-body ratio)|
|Sensors||Fingerprint (rear-mounted), accelerometer, proximity|
|Colors||Coral Blue, Champagne Gold, Black, Metallic Red|
|Operating System||Android 7.0 (Nougat)|